Direct-to – Garmin GNS 430 User Manual
Page 58
50
Selecting a Destination by Facility Name or City
In addition to selecting a destination by identifi er, the select direct-to waypoint page
also allows you to select airports, VORs and NDBs by facility name or city location. If du-
plicate entries exist for the entered facility name or city, additional entries may be viewed
by continuing to rotate the small right knob (
a
) during the selection process. (See page
96 for more information on duplicate waypoints.)
To select a direct-to destination by facility name or city:
1. Press the
D
key. The select direct-to waypoint page will appear, with the waypoint
identifier field highlighted.
2. Rotate the large (
d
) right knob to highlight the facility name (second line; see above) or the
city (third line; see above) field.
3. Use the small (
a
) and large (
d
) right knobs to enter the facility name or city location of the
desired destination waypoint. As you spell the facility name or city, the GNS 430’s Spell’N’Find
feature will select the first entry in the database based upon the characters you have entered
up to that point.
4. Continue rotating the small right knob (
a
) to scroll through any additional database listings for
the selected facility name or city. You can also scroll backwards with the small right knob (
b
)
if you scroll past the desired waypoint.
5. Press
E
to confirm the selected waypoint, and
E
to activate the direct-to function.
DIRECT-TO
Selecting by
Facility or City
3
To select the direct-to destination by facility name
(shown above) or city location (shown below),
highlight the second or third line on the direct-to
waypoint page. Use the small (
a
) and large (
d
)
right knobs to enter the facility name or city. The
identifier(s) for any matching entries will appear
on the top line of the page.
Facility Name
Identifier, Symbol
and Region
Flight Plan
Field
City
Nearest Airport
Field
190-00140-00.indd 50
5/7/2003, 5:16:47 PM