Garmin GNS 430 - Manual (Page 48)

40
2a. Rotate the large right knob ( d ) to move the cursor through the list of frequencies. If there are
more frequencies in the list that can be displayed on the screen, a scroll bar along the right-
hand side of the screen will indicate which part of the list is currently being displayed.
3a. To place a frequency in the standby field of the COM or VLOC window, highlight the desired
frequency and press E .
Some listed frequencies may include designations for limited usage, as follows:
“TX” - transmit only “RX” - receive only
“PT” - part time frequency
If a listed frequency has sector or altitude restrictions, the frequency will be preceded
by an “Info?” designation.
To view usage restrictions for a frequency:
1. Rotate the large right knob ( d ) to place the cursor on the “Info?” designation directly in front of
the desired frequency.
2. Press E to display the restriction information.
3. To return to the NAVCOM page, press E .
NAV PAGES
NAVCOM Page
2
o
b
p
a
o
a
}
scroll bar
190-00140-00.indd 40 5/7/2003, 5:16:39 PM