Wpt pages – Garmin GNS 430 User Manual
Page 125
117
WPT PAGES
Modifying / Deleting
User Waypoints
6
To review and/or modify a user waypoint from the user waypoint list:
1. Select the user waypoint list, as described on page 116.
2. Rotate the large right knob (
d
) to highlight the desired user waypoint.
3a. Press
E
to display the user waypoint page for the selected waypoint. From this page you
may review all information defining the waypoint and its position.
4a. To modify the waypoint’s position or reference waypoint information, follow the steps described
on page 114 and 115. (Keep in mind that you’ve already selected a user waypoint page which
displays the desired user waypoint, so you may skip the first two steps of the procedure on
page 114 or 115.)
5. To exit the user waypoint page, rotate the large right knob (
d
) to highlight “Done?” and press
E
.
To rename a user waypoint from the user waypoint list:
1. Select the user waypoint list, as described on page 116.
2. Rotate the large right knob (
d
) to highlight the desired user waypoint.
3b. Use the small (
a
) and large (
d
) right knobs to change the name of the user waypoint.
(Enter the new name directly over the old name.) Press
E
to accept the new name.
4b. A “rename waypoint” confirmation window is displayed. With “Yes?” highlighted, press
E
to
rename the selected user waypoint.
To delete a user waypoint from the user waypoint list:
1. Select the user waypoint list, as described on page 116.
2. Rotate the large right knob (
d
) to highlight the desired user waypoint.
3c. Press
c
to display a “delete waypoint” confirmation window.
4c. With “Yes?” highlighted, press
E
to delete the selected user waypoint.
p
c
q
b
p
b
190-00140-00.indd 117
5/7/2003, 5:17:53 PM