Nav pages – Garmin GNS 430 User Manual
Page 44
36
To change a map setup feature:
1. Rotate the large right knob (
d
) to highlight “Setup Map?” and press
E
.
2. To change map orientation, rotate the small right knob (
a
) to select “Map” and press
E
.
Rotate the large right knob (
d
) to highlight the “Orientation” field and rotate the small right knob
(
a
) to select the desired option . Select “North up” to fix the top of the map display to a north
heading. Select “Track up” to adjust the top of the map display to your current track heading.
Select “DTK up” to fix the top of the map display to your desired course. Press
E
to accept
the selected option.
3. To enable/disable automatic zoom, rotate the small right knob (
a
) to select “Map” and press
E
. Rotate the large right knob (
d
) to highlight the “Auto Zoom” field and rotate the small
right knob (
a
) to select “On” or “Off”. Press
E
to accept the selected option. The automat-
ic zoom feature will automatically adjust the map scale from 2000 nm through each lower scale,
stopping at 1.0 nm as you approach your destination waypoint.
4. To enable/disable the wind vector, all background land data or all Jeppesen aviation data, rotate
the small right knob (
a
) to select “Map” and press
E
. Use the large right knob (
d
) to
highlight the appropriate field and rotate the small right knob (
a
) to select “On” or “Off”. Press
E
to accept the selected option.
5. For airports, NAVAIDs, active flight plan waypoints, user-created waypoints, state/provincial
boundaries, rivers/lakes and cities: rotate the small right knob (
a
) to select the appropriate
“Group” name (per the chart on the previous page) and press
E
. Use the large right knob
(
d
) to highlight the zoom field for the desired feature and rotate the small right knob (
a
) to
select the maximum scale at which the feature should appear on screen. Or select “Off” to never
display the selected feature. Press
E
to accept the selected option. Next, rotate the large
right knob (
d
) to highlight the text field for the desired feature and rotate the small right knob
(
a
) to select the desired text size, or select “None” to disable text descriptions. Press
E
to
accept the selected option.
6. For airspace boundaries, highways, roads, railroad lines, track log data, active flight plan course
lines, and lat/long grid lines: rotate the small right knob (
a
) to select the appropriate “Group”
name (per the chart on the previous page) and press
E
. Use the large right knob (
d
) to
highlight the zoom field for the desired feature and rotate the small right knob (
a
) to select the
maximum scale at which the feature should appear on screen. Or select “Off” to never display the
selected feature. Press
E
to accept the selected option.
NAV PAGES
Map Page Options
2
o
o
o
190-00140-00.indd 36
5/7/2003, 5:16:35 PM