Garmin GNS 430 - Manual (Page 22)

14
2. Rotate the small right knob ( a ) to display the list of airports (departure, arrival and en route)
for your flight plan or direct-to. Continue to rotate the small right knob ( a ) until the desired
airport is selected.
3. Press E to display the frequency list for the selected airport.
A frequency listed on the NAVCOM page can be quickly transferred to the standby
fi eld of the COM or VLOC windows. This time saving process prevents having to “re-
key” a frequency already displayed elsewhere on the screen.
To select a communication or navigation frequency:
1. Push the small right knob ( r ) to activate the cursor in the GPS window.
2. Rotate the large right knob ( d ) to select the desired frequency from the list.
3. Press E to transfer the selected frequency to the standby field in the COM or VLOC win-
dow. COM frequencies will automatically go to the standby field of the COM window and navi-
gation frequencies will automatically go to the standby field of the VLOC window, regardless of
which window is currently highlighted by the cursor.
4. To activate the selected frequency, press the
W
or
V
key.
TAKEOFF TOUR
NAVCOM Page
The navigation/communications (NAVCOM)
page provides a complete list of airport fre-
quencies at your departure, en route and
arrival airports. To place a frequency from
this list on standby, highlight the desired fre-
quency and press
E .
To display frequencies for a different airport
along your flight plan, press the small right
knob (
r ) to highlight the airport identifier
field. Rotate the small right knob (
a
) to dis-
play the list of airports within your flight plan.
Continue rotating the small right knob (
a
) to
select the desired airport and press E .
Arrival,
Enroute or
Departure Airport
Frequency
List
NAVCOM Page
190-00140-00.indd 14 5/7/2003, 5:16:18 PM