Procedures – Garmin GNS 430 User Manual

Page 76

Advertising
background image

68

Basic Approach Operations

The GNS 430 provides non-precision approach guidance using its built-in GPS re-

ceiver. The GPS receiver can also be used as a supplemental aid for precision approaches,
but the localizer and glideslope receivers MUST be used for primary approach course
guidance.

Approaches designed specifi cally for GPS are often very simple and don’t require

overfl ying a VOR or NDB. Currently, many non-precision approaches have “GPS over-
lays” to let you fl y an existing procedure (VOR, VOR/DME, NDB, RNAV, etc.) more
accurately using GPS. To date, there are over 2,400 GPS-only approaches and over 2,900
GPS overlay approaches.

Many overlay approaches are complex (in comparison to GPS-only approaches). The

GNS 430 displays and guides you through each leg of the approach—automatically se-
quencing through each of these legs, up to the missed approach point (MAP). Approaches
may be fl own “as published” with the full transition — using any published feeder route
or initial approach fi x (IAF) — or may be fl own with a
vectors-to-fi nal transition.

Approach operations on the GNS 430 will typically begin with the same basic steps:

1. Select the destination airport using the

D

key, or as the last waypoint in the active flight plan.

2. Choose the “Select Approach?” option from the procedures page (see page 66) or from the active flight

plan options (see page 61).

3. “Load” the approach (often while enroute) in anticipation of its future use. This places the approach in the

active flight plan, but retains course guidance in the enroute section until the approach is “activated”.

4. “Activate” the full approach or vectors-to-final, as appropriate. In some scenarios, you may find it more

convenient to immediately activate the approach and skip the “Load” process outlined above in step #3.

The GNS 430 provides both options.

Select Destination

“Select” and “Load”
the approach

“Activate” the
approach

PROCEDURES

Basic Approach

Operations

5

190-00140-00.indd 68

5/7/2003, 5:17:04 PM

Advertising
This manual is related to the following products: