Procedures, Po n – Garmin GNS 430 User Manual

Page 93

Advertising
background image

85

TYPE 3: Course from fix to manual sequence

Course from fi x to manual sequence

legs will appear on the active fl ight
plan and map pages with “man seq” in
place of a waypoint identifi er. An ex-
ample of this type of course leg appears
in the COASTAL ONE DEPARTURE
from Westfi eld, Massachusetts (Barnes
Muni). The example leg corresponds
to the departure leg from Barnes
Municipal and appears as follows on
the active fl ight plan and default NAV
pages:

1. Select the departure (CSTL1) from the

procedures page. Then select the depar-

ture runway (RW02, in this example) and

transition (GEDIC). Refer to page 66 for

instructions on selecting departures.

2. As you depart the airfield, “NEXT DTK

026°” appears in the lower right corner

of the screen and “SUSP” appears directly above the

O

key. You are now on the ‘course from fix to

manual sequence’ leg. The distance displayed on the active flight plan, default NAV and map pages is

FROM the waypoint fix (the departure runway, in this example).

3. Fly the outbound course keeping the CDI needle centered. Once you are cleared to sequence to the

next leg, press the

O

key. Confirm that “SUSP” no longer appears directly above the

O

key.

An alert (“NEXT DTK 186°”) will appear in the lower right corner of the screen to guide you to the next

waypoint (HFD VOR). The actual desired track (DTK) will depend on your ground speed and distance

from HFD VOR.

4. Once the

O

key is pressed, the GNS 430 will automatically sequence to each waypoint along the

remainder of the departure route, including the selected transition.

5

p

o

n

DO NOT USE

FOR NAVIGATION

COASTAL ONE DEPARTURE
(CSTL1.CCC)

DEPARTING BARNES MUNI,

Fly assigned heading and altitude
for radar vectors to HFD
VOR. Expect clearance to
requested flight level 10
minutes after departure. From
over HFD VOR, proceed via the
HFD R-143 to Thumb Int,
then via the HTO R-010 to
Yoder Int, then via the CCC
R-057 to CCC VOR.
Then via transition
or assigned
route.

n

o p

q

PROCEDURES

Course From Fix

Approach Examples

190-00140-00.indd 85

5/7/2003, 5:17:23 PM

Advertising
This manual is related to the following products: