Garmin GNS 430 - Manual (Page 37)

29
NAV PAGES
Default NAV Page
2
Directly below the CDI appears the active leg of your fl ight plan, or the direct-to des-
tination when using the D key. This will automatically sequence to the next leg of your
fl ight plan as you reach each interim waypoint. If no fl ight plan or direct-to destination
has been selected, the destination fi eld will remain blank.
Selecting Desired On-Screen Data
At the bottom of the default NAV page you’ll fi nd six user-defi nable fi elds which dis-
play the data you’ll need as your fl ight progresses. By default these fi elds display: distance
to destination (DIS), desired track (DTK), bearing to destination (BRG), ground speed
(GS), ground track (TRK) and estimated time en route (ETE). However, each of these
fi elds can be custom-tailored to your preferences by
selecting a different data item. Available data items include:
• Bearing to destination (BRG) • Course to steer (CTS)
• Distance to destination (DIS) • Desired track (DTK)
• En route safe altitude (ESA) • Estimated time of arrival (ETA)
• Estimate time en route (ETE) • Ground speed (GS)
• Minimum safe altitude (MSA) • Track angle error (TKE)
• Ground track (TRK) • Vertical speed required (VSR)
• Cross track error (XTK) • Fuel Flow (FLOW) (When Configured)
If no fl ight plan or direct-to destination has been selected only speed, track, altitude
and minimum safe altitude data may be displayed. All other data types will appear as
blank lines—on the default NAV page—until a destination is selected.
To select a different data item for any data field:
1. Starting with the default NAV page, press the m key to display an options menu.
2. The “Change Fields?” option is already highlighted, so press E to select this option.
3. Use the large right knob ( d ) to highlight the data field you wish to change.
4. Rotate the small right knob ( a ) to display the list of available data items. Continue rotating the
small right knob ( a ) to select the desired data item from the list.
{continued}
p
n
o
190-00140-00.indd 29 5/7/2003, 5:16:29 PM