Aux pages – Garmin GNS 430 User Manual
Page 151
143
3. The flashing cursor highlights the transfer data option (TRANSFER) field. Rotate the small
right knob (
a
) to display a window of available data options:
• Active Flight Plan—transfer the active flight plan to/from a second 400-
Series Garmin unit (GNS 430/GNC 420/GPS 400) in a dual unit installa-
tion. This option is the default when selecting “Crossfill” from the flight
planning page.
• Flight Plan—transfer any stored flight plan to/from a second 400-Series
unit, by selecting the flight plan by number. This option is the default
when selecting “Crossfill” from the flight plan catalog. See page 58.
• User Waypoints (all)—transfer all stored user waypoints to/from a sec-
ond 400-Series unit.
• User Waypoint—transfer the specified user waypoint to a second 400-
Series unit.
4. Continue rotating the small right knob (
a
) to select the desired data option. Press
E
when finished.
5. For a stored flight plan (“Flight Plan” data option), the flight plan number field is highlighted.
Rotate the small right knob (
a
) to select the desired flight plan and press
E
.
6. For a specified user waypoint (“User Waypoint” data option), the waypoint identifier field is
highlighted. Use the small (
a
) and large (
h
) right knobs to enter the identifier of the
desired user waypoint. Press
E
when finished.
7. The flashing cursor moves to the “CROSS-SIDE” field. Rotate the small right knob (
a
) to
select “To” or “From” and press
E
.
8. The flashing cursor moves to the “Initiate Transfer?” confirmation field. Press
E
to transfer
the selected data.
AUX PAGES
Flight Planning
9
p
u
p
190-00140-00.indd 143
5/7/2003, 5:18:18 PM