Garmin GNS 430 - Manual (Page 160)

152
AUX PAGES
Setup 1
9
Setup 1 Page
The setup 1 page provides access (via “menu options”) to airspace alarms, CDI scale
adjustment, an arrival alarm, units of measure settings, position formats, map datums and
settings for local or UTC time display. When a menu option is selected, the corresponding
page will appear providing access to the various unit settings.
To select a menu option from the setup 1 page:
1. Press the small right knob ( r ) momentarily, to activate the flashing cursor.
2. Rotate the large right knob ( d ) to select the desired menu option, and press E .
The following menu options are available:
Airspace Alarms— allows you to turn the controlled / special-use airspace message
alerts on or off. This will not affect the alerts listed on the nearest airspace page or the air-
space boundaries depicted on the map page. It will simply turn on/off the warning provided
when you are approaching or near an airspace.
An altitude buffer is also provided which “expands” the vertical range above or below
an airspace. For example, if the buffer is set at 500 feet, and you are more than 500 feet
above or below an airspace, you will not be notifi ed with an alert message; if you are less
than 500 feet above or below an airspace and projected to enter it, you will be notifi ed
with an alert message. The default is 200 feet.
o
o
n
Menu Options: to
select, highlight
with cursor and
press E .
Third Page
in AUX group
190-00140-00.indd 152 5/7/2003, 5:18:26 PM