Flight plans – Garmin GNS 430 User Manual
Page 73
65
On page 60 the “Activate Leg?” option is discussed, which allows you to specify which
leg of the fl ight plan will currently be used for navigation guidance. A shortcut also exists
for this operation, using the
D
key.
To activate a specific leg of the active flight plan:
1. Press the small right knob (
r
) to activate the cursor and rotate the large right knob (
d
) to
highlight the desired destination waypoint.
2a. Press
D
twice to display an “Activate Leg” confirmation window.
3. With “Activate?” highlighted, press
E
.
When using instrument procedures, this feature can be used not only to activate a
specifi c point-to-point leg, but to also activate the procedure turn portion of an approach,
follow a DME arc or activate a holding pattern.
Any approach, departure or arrival can be reviewed on the appropriate airport page in
the Waypoint page group. See page 94.
To review a procedure while viewing a flight plan page:
1. With a flight plan page displayed, press the small right knob (
r
) to activate the cursor.
2b. Rotate the large right knob (
d
) to highlight the procedure header and press
E
to select
the WPT page group.
4
FLIGHT PLANS
Active Flight Plan
Leg Selection
o
a
n
o
b
190-00140-00.indd 65
5/7/2003, 5:17:01 PM