Garmin GNS 430 - Manual (Page 196)

188
D TROUBLE-
SHOOTING
APPENDIX
How do I re-select the same approach or activate a new approach after a
missed approach?
After fl ying all missed approach procedures, you may reactivate the same approach for another
attempt from the procedures page. Once you have been given clearance for another attempt, activate
the approach from the procedures page by highlighting “Activate Approach?” and then pressing E.
The GNS 430 will provide navigation along the desired course to the waypoint and rejoin the ap-
proach in sequence from that point on. See page 65 for information on activating a specifi c fl ight plan
leg.
To activate a new approach for the same airport, select the new procedure from the procedures
page. To view the procedures page, press P and rotate the large right knob ( h ) to highlight “Select
Approach?”. Press E and rotate the large right knob ( h ) to highlight the new approach you want to fl y. Press E to select the approach, then select
the desired transition. Finally, highlight “Activate?” at the bottom right corner of the screen and press E to activate the new approach.
To activate a new approach to a different airport, press D and select the desired airport using the small ( a ) and large ( h ) right knobs. Press E
to accept the selected airport, then follow the steps in the preceding paragraph to select an approach for the new airport. See section 5 for more infor-
mation on selecting and activating approaches.
190-00140-00.indd 188 5/7/2003, 5:18:55 PM