Garmin GNS 430 - Manual (Page 111)

103
Airport Approach Page Options
The following options are available for the airport approach page, by pressing the
m key:
Load into Active FPL? allows you to load the selected approach into the active flight
plan—without activating it. This performs the same operation as selecting “Load?”
from the procedures page “Select Approach?” option. See page 66.
To load an approach from the airport approach page:
1. Select the desired approach and transition using the steps outlined on page 66.
2. Press
m to display the airport approach page options.
3. Rotate the large right knob ( d ) to highlight “Load into Active FPL?” and press E .
4. The active flight plan page will appear. Press F to return to the airport procedures page.
Load and Activate? allows you to load the selected approach into the active flight plan
and activate navigation guidance to the approach transition. See page 67.
To load and activate an approach from the airport approach page, follow the steps
above, but select “Load and Activate?” in step #3.
WPT PAGES
Airport Approaches
6
NOTE
Not all approaches in the database are approved for GPS use.
As you select an approach, a “
GP
S
” designation to the right of
the procedure name indicates the procedure can be flown using
the GPS receiver. Some procedures will not have this designa-
tion, meaning the GPS receiver may be used for supplemental
navigation guidance only. ILS approaches, for example, must be
flown by tuning the VLOC receiver to the proper frequency and
coupling the VLOC receiver to the external CDI (or HSI).
p
n
190-00140-00.indd 103 5/7/2003, 5:17:40 PM