Dell PowerEdge RAID Controller H700 User Manual

Page 150

Advertising
background image

150

Troubleshooting

smartd[smartd[2338]
Device: /dev/sda, Bad
IEC (SMART) mode page,
err=-5, skip device

smartd[2338] Unable to
register SCSI device
/dev/sda at line 1 of
file /etc/smartd.conf

This is a known issue. An unsupported

command is entered through the user

application. User applications attempt to direct

Command Descriptor Blocks to RAID volumes.

The error message does not effect the feature

functionality.
The Mode Sense/Select command is supported

by firmware on the controller. However, the

Linux kernel daemon issues the command to

the virtual disk instead of to the driver IOCTL

node. This action is not supported.

Table 9-7. Linux Operating System Errors

(continued)

Error Message

Corrective Action

PERC7.2_UG.book Page 150 Thursday, March 3, 2011 2:14 PM

Advertising