Dell POWEREDGE R515 User Manual

Page 45

Advertising
background image

About Your System

45

Keyboard fuse has
failed

Overcurrent detected at the

keyboard connector.

See "Getting Help" on

page 187.

Local keyboard
may not work
because all user
accessible USB
ports are
disabled.
If operating
locally, power
cycle the system
and enter system
setup program to
change settings.

The USB ports are disabled

in the system BIOS.

Power down and restart the

system from the power

button, and then enter the

System Setup program to

enable the USB port(s).

See "Entering the System

Setup Program" on page 58.

Manufacturing
mode detected

System is in manufacturing

mode.

Reboot to take the system

out of manufacturing mode.

Maximum rank
count exceeded.
The following
DIMM has been
disabled: x

Invalid memory

configuration. The system

runs but with the specified

memory module disabled.

Ensure that the memory

modules are installed in a

valid configuration. See

"General Memory Module

Installation Guidelines" on

page 105.

Memory
Initialization
Warning: Memory
size may be
reduced

Invalid memory

configuration. The system

runs but with less memory

than is physically available.

Ensure that the memory

modules are installed in a

valid configuration.

See "General Memory

Module

Installation Guidelines" on

page 105.

Message

Causes

Corrective Actions

book.book Page 45 Tuesday, August 24, 2010 1:47 PM

Advertising