Back-panel indicators and features, Table 3-2 – Dell PowerVault 770N (Deskside NAS Appliance) User Manual
Page 13
Table 3-2. Front-Panel Features
Component
Description
Power button
Turns system power off and on.
If you turn off the system using the power button and the system is running an ACPI-compliant
operating system, the system can perform an orderly shutdown before power is turned off.
If the system is not running an ACPI-compliant operating system, power is turned off immediately
after the power button is pressed.
The button is enabled in the System Setup program. When disabled, the button can only turn system
power on. For more information, see the User's Guide and the operating system's documentation.
Power indicator
Provides information on power status (see "
Power-supply
indicators
Provide information on power status (see "
CD and diskette
drive indicators
Indicates read or write access to the respective drive.
Hard-drive
indicators
Provide information on the status of the respective hard drive (see "
").
NIC indicators
Indicate whether the NIC has a valid link to the network (see "
").
NMI button
Troubleshoots software and device driver errors when using certain operating systems. You can press this
button using the end of a paper clip. The NMI option is enabled in the System Setup program.
NOTICE:
Pressing this button halts the operating system and displays a diagnostic screen.
Back-Panel Indicators and Features
shows the back-panel features of the system.
describes the back-panel features.
Figure 3-3. Back-Panel Features