Integrated devices screen – Dell PowerVault 770N (Deskside NAS Appliance) User Manual
Page 78
Time
System
Date
Resets the date on the system's internal calendar.
Diskette
Drive A:
Displays a screen that allows you to select the type of diskette drive for your system.
System
Memory
Displays the amount of system memory. This option has does not have user-selectable settings.
Video
Memory
Displays the amount of video memory. This option does not have user-selectable settings.
OS Install
Mode
(Off
default)
Determines the maximum amount of memory available to the operating system. On sets the maximum
memory to 256 MB. Off makes all of the system memory available to the operating system. Some operating
systems cannot install with more than 2 GB of system memory. Enable this option (On) during operating
system installation and disable (Off) after installation.
CPU
Information
(Logical
Processor
Enabled
default)
Displays information related to microprocessors (speed, cache size, and so on). Enable or disable Hyper-
Threading technology by changing the setting of the Logical Processor option.
Boot
Sequence
Determines the order in which the system searches for boot devices during system startup. Available options
can include the diskette drive, CD drive, hard drives, and network.
Hard-Disk
Drive
Sequence
Determines the order in which the system searches the hard drives during system startup. The selections
depend on the hard drives installed in your system.
Integrated
Devices
See "
PCI IRQ
Assignment
Displays a screen to change the IRQ assigned to each of the integrated devices on the PCI bus, and any
installed expansion cards that require an IRQ.
PCI-X Slot
Information
Displays a menu of selectable fields. Selecting any of the fields displays the following information for the PCI-X
bus you selected:
Occupied or unoccupied
For occupied slots, the operating frequency and mode of the slots (PCI or PCI-X)
For unoccupied slots, the maximum operating frequency and the capable operating mode of the slots
Console
Redirection
See "
System
Security
Displays a screen to configure the system password and setup password features. See "
" and "
" for more information.
Keyboard
NumLock
Determines whether your system starts up with the NumLock mode activated on 101- or 102-key keyboards
(does not apply to 84-key keyboards).
Report
Keyboard
Errors
Enables or disables reporting of keyboard errors during the POST. Enable this option for host systems that
have keyboards attached. Select Do Not Report to suppress all error messages relating to the keyboard or
keyboard controller during POST. This setting does not affect the operation of the keyboard itself if a keyboard
is attached to the system.
Asset Tag
Displays the customer-programmable asset tag number for the system if an asset tag number has been
assigned.
Integrated Devices Screen
lists the options and descriptions for the information fields that appear on the Integrated Devices screen.
Table 6-3. Integrated Devices Screen Options