Removing and replacing the cooling shroud fan – Dell PowerVault 770N (Deskside NAS Appliance) User Manual
Page 39
Advertising
NOTICE:
The cooling fans are hot-pluggable. To maintain proper cooling while the system is on, only replace one fan
at a time.
2. Locate the faulty fan and while pressing the fan release lever, lift the fan straight up to clear the fan assembly (see
Figure 4-11. Removing and Replacing Individual Fans
Replacing a Fan
1. Lower the fan into the fan assembly until the fan snaps into position.
2. Replace the cover (see "
").
Removing and Replacing the Cooling Shroud Fan
Removing the Cooling Shroud Fan
1. Remove the cover (see "
2. Push down on the two release latches and slide the fan out of the bracket on the cooling shroud (see
Figure 4-12. Removing and Replacing the Cooling Shroud Fan
Advertising