Dell PowerEdge C8000 - Manual (Page 103)

Using the System Setup Program 103
0052 N/A For the next system boot, set the IPL priority to: hard
disk then option ROMs (if the devices are available).
0053 N/A For the next system boot, set the IPL priority to:
Network, hard disk, RAID,USB storage, CD/DVD-
ROM (if the devices are available).
0054 N/A For the next system boot, set the IPL priority to:
CD/DVD-ROM, USB Storage, hard disk, RAID,
Network (if the devices are available).
005C N/A Enables BIOS remote update on the next reboot, to
search for an operating-system initiated BIOS update
image.
005D N/A Disables BIOS remote update on the next reboot, to
search for an operating-system initiated BIOS update
image.
006E Embedded NIC1 Enables the onboard NIC1 controller, but disables the
NIC associated PXE or RPL boot-ROM.
0087 Video
Enumeration
Allows BIOS to use the onboard video controller for
boot-time messages.
0088 Video
Enumeration
Allows BIOS to use the first add-in video controller for
boot-time messages. Depending on the BIOS search
order and system slot layout.
008C Embedded USB
Controller
Allows BIOS to enable the built-in USB controller at
system startup.
008D Embedded USB
Controller
Allows BIOS to enable the built-in USB controller at
system startup.
00A1 Restore on AC
Power Loss
System remains off until the power button is pressed.
00A2 Restore on AC
Power Loss
System reverts to the last power state before power
loss.
00A3 Restore on AC
Power Loss
System switches back on after the AC power loss.
00BA Embedded NIC2 Disables the onboard NIC2 controller.
Table 2-1. D4 Token Table (continued)
Token Setup Option Description