Dell PowerEdge C8000 - Manual (Page 120)

120 Using the System Setup Program
488F 4th Boot Device Sets the network device as the 4th boot device.
4890 4th Boot Device Sets the hard-drive as the 4th boot device.
4891 4th Boot Device Sets RAID as the 4th boot device.
4892 4th Boot Device Sets a USB storage device as the 4th boot device.
4893 4th Boot Device Sets the CD/DVD ROM as the 4th boot device.
4894 5th Boot Device Sets the network device as the 5th boot device.
4895 5th Boot Device Sets the hard-drive as the 5th boot device.
4896 5th Boot Device Sets RAID as the 5th boot device.
4897 5th Boot Device Sets a USB storage device as the 5th boot device.
4898 5th Boot Device Sets the CD/DVD ROM as the 5th boot device.
48A0 ACPI SPMI Table Disables the ACPI SPMI Table for BMC ROM
update.
48A1 ACPI SPMI Table Enables the ACPI SPMI Table for IPMI driver
installation.
48A2 BMC LAN Port
Configuration
Sets BMC LAN Port to Dedicated-NIC.
48A3 BMC LAN Port
Configuration
Sets BMC LAN Port to Shared-NIC.
48A4 BMC NIC IP
Source
Sets BMC LAN to get LAN IP from Static mode.
48A5 BMC NIC IP
Source
Sets BMC LAN to get LAN IP from DHCP mode.
48A6 IPv6 Mode Disables IPv6 internet protocol support.
48A7 IPv6 Mode Enables IPv6 internet protocol support.
48A8 IPv6 AutoConfig Disables IPv6 auto configuration.
48A9 IPv6 AutoConfig Enables IPv6 auto configuration.
48AA Serial Port Mode Sets the console redirection baud rate to 3,8400 bits
per second.
Table 2-1. D4 Token Table (continued)
Token Setup Option Description