Dell PowerEdge C8000 - Manual (Page 131)

Using the System Setup Program 131
Table 2-7. Event Commands (NetFn: 0x04H)
Command NetFn Code IPMI2.0 BMC
Set Event Receiver S/E 0x00h M Yes
Get Event Receiver S/E 0x01h M Yes
Platform Event S/E 0x02h M Yes
Table 2-8. PEF/PET Alerting Commands (NetFn: 0x04H)
Command NetFn Code IPMI2.0 BMC
Get PEF Capabilities S/E 0x10h M Yes
Arm PEF Postpone Timer S/E 0x11h M Yes
Set PEF Configuration Parameters S/E 0x12h M Yes
Get PEF Configuration Parameters S/E 0x13h M Yes
Set Last Processed Event ID S/E 0x14h M Yes
Get Last Processed Event ID S/E 0x15h M Yes
Alert Immediate S/E 0x16h O Yes
PET Acknowledge S/E 0x17h O Yes
Table 2-9. Sensory Device Commands (NetFn: 0x04H)
Command NetFn Code IPMI2.0 BMC
Get Device SDR Info S/E 0x20h O No
Get Device SDR S/E 0x21h O No
Reserve Device SDR Repository S/E 0x22h O No
Get Sensor Reading Factors S/E 0x23h O Yes
Set Sensor Hysteresis S/E 0x24h O Yes
Get Sensor Hysteresis S/E 0x25h O Yes
Set Sensor Threshold S/E 0x26h O Yes
Get Sensor Threshold S/E 0x27h O Yes
Set Sensor Event Enable S/E 0x28h O Yes