Dell PowerEdge C8000 - Manual (Page 29)

About Your System 29
002Fh No Microcode
Be Updated
Pause Processor
microcode load
failed
Ensure that your processors
match and conform to the
type described in the
processor technical
specifications outlined in
your system’s Getting Started
Guide.
8012h SATA 0 Device
Not Found
Pause SATA 0 device
not found
Check if the SATA port 0 is
enabled. See "SATA
Configuration" on page 77.
Install a SATA device to SATA
port 0.
If the problem persists, see
"Getting Help" on page 241.
8013h SATA 1 Device
Not Found
Pause SATA 1 device
not found
Check if the SATA port1 is
enabled. See "SATA
Configuration" on page 77.
Install a SATA device to SATA
port 1.
If the problem persists, see
"Getting Help" on page 241.
8014h SATA 2 Device
Not Found
Pause SATA 2 device
not found
Check if the SATA port 2 is
enabled. See "SATA
Configuration" on page 77.
Install a SATA device to SATA
port 2.
If the problem persists, see
"Getting Help" on page 241.
8015h SATA 3 Device
Not Found
Pause SATA 3 device
not found
Check if the SATA port 3 is
enabled. See "SATA
Configuration" on page 77.
Install a SATA device to SATA
port 3.
If the problem persists, see
"Getting Help" on page 241.
Error
Code Error Message Response Error Cause Corrective Actions