Dell PowerEdge C8000 - Manual (Page 171)

Installing System Components 171
Figure 3-21. Removing and Installing the RAID Battery
Installing the RAID Battery
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Orient the new RAID battery appropriately in the battery holder and push
the battery firmly into the battery holder until it snaps into place.
See Figure 3-21.
2 Lower the RAID battery assembly to the sled tray. See Figure 3-20.
3 Replace the two screws securing the RAID battery assembly to the sled
tray. See Figure 3-20.
4 Connect the RAID battery cable to the RAID controller card.
See Figure 3-20.
5 Replace the front cover. See "Installing the Front Cover" on page 149.
6 Replace the sled. See "Installing a Sled" on page 144.
1 battery holder 2 RAID battery
1
2