Installing the expansion card riser, Figure 3-24, See figure 3-24 – Dell PowerEdge C8000 User Manual
Page 175
Advertising
Installing System Components
175
Figure 3-24. Removing and Installing the Expansion Card Riser
Installing the Expansion Card Riser
1 Place the expansion card riser into the front cover. See Figure 3-24.
2 Replace the two screws securing the expansion card riser. See Figure 3-24.
3 If applicable, replace the expansion card or RAID controller card.
See "Installing the Expansion Card" on page 166 or "Installing the RAID
4 Replace the front cover. See "Installing the Front Cover" on page 149.
5 Replace the sled. See "Installing a Sled" on page 144.
1
expansion card riser
2
M3 screws (2)
1
2
Advertising