Microsd card, Removing a microsd card – Dell PowerEdge C8000 User Manual
Page 147
Advertising
Installing System Components
147
MicroSD Card
Removing a MicroSD Card
1 Power down the sled using OS commands or the Baseboard Management
Controller, and ensure that the sled's power is off.
When a sled is powered off, its front-panel power-on indicator is off.
2 Pull up on the sled release latch at the bottom of the sled to disengage the
sled from the server enclosure. See Figure 3-7.
3 Using the handle, slide the sled out slightly until you have access to the
MicroSD card slot. See Figure 3-7.
4 Press the MicroSD card in to release it from the slot and remove the card.
Figure 3-7. Removing and Installing a MicroSD Card
1
release latch
2
handle
3
MicroSD card
4
MicroSD card slot
1
2
3
4
Advertising