Dell PowerEdge C8000 - Manual (Page 121)

Using the System Setup Program 121
48AB Flow Control Selects none as the flow control for console
redirection.
48AC Flow Control Selects hardware as the flow control for console
redirection.
48AD Flow Control Selects software as the flow control for console
redirection.
48AE Terminal Type The BIOS console redirection, if enabled, operates in
VTUTF8 emulation model. See also tokens BFh, C0h,
and D7h.
48AF VT-UTF8 Combo
Key Support
Disables VT-UTF8 Combination Key Support for
ANSI/VT100 terminals.
48B0 VT-UTF8 Combo
Key Support
Enables VT-UTF8 Combination Key Support for
ANSI/VT100 terminals.
48B1 Event logging Disables BIOS to log system events to BMC, errors
include ECC/PCI/PCIe/HT…etc.
48B2 Event logging Enables BIOS to log system events to BMC, errors
include ECC/PCI/PCIe/HT…etc.
48B3 NMI on Error Disables BIOS to generate NMI when PCIe
uncorrectable errors occur.
48B4 NMI on Error Enables BIOS to generate NMI when PCIe
uncorrectable errors occur.
48B5 Memory
Operating Voltage
Indicates all DIMMs in the system are operating at
1.25 volts.
48C0 Frequency Ratio Sets frequency multiplier as maximum level.
48C1 Frequency Ratio Downgrades frequency multiplier one level.
48C2 Frequency Ratio Downgrades frequency multiplier two levels.
48C3 Frequency Ratio Downgrades frequency multiplier three levels.
48C8 QPI Frequency Sets the QPI frequency runs at maximum speed.
48C9 QPI Frequency Sets the QPI frequency runs at 4.800GT.
48CA QPI Frequency Sets the QPI frequency runs at 5.866GT.
48CB QPI Frequency Sets the QPI frequency runs at 6.400GT.
Table 2-1. D4 Token Table (continued)
Token Setup Option Description