Dell PowerEdge C8000 - Manual (Page 146)

146 Installing System Components
Removing a Double-Wide Sled Blank
Squeeze and hold the release latches and slide the blank out of the enclosure.
See Figure 3-6.
Figure 3-6. Removing and Installing a Double-Wide Sled Blank
Installing a Double-Wide Sled Blank
Hold the blank with the guide rail facing forward. Slide the blank into the
enclosure until it is fully seated and the release latches snap into place.
See Figure 3-6.
1 release latches (2) 2 double-wide sled blank
1
2