Dell PowerEdge C8000 - Manual (Page 185)

Installing System Components 185
Figure 3-32. Removing and Installing the MicroSD Card Reader
Installing the MicroSD Card Reader
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Place the MicroSD card reader on the MicroSD card reader support
bracket. See Figure 3-32.
2 Replace the two screws securing the MicroSD card reader. See Figure 3-32.
3 Connect the MicroSD card reader cable to the MicroSD card reader. See
Figure 3-32.
4 If applicable, install the MicroSD card. Hold the MicroSD card with the
label side facing to the right and press the card into the slot to lock into
place. See Figure 3-31.
1 MicroSD card reader cable 2 M3 screws (2)
3 MicroSD card slot 4 MicroSD card reader
5 MicroSD card reader connector
1
2
3
4
5