Removing the microsd card reader support bracket, Removing the microsd card reader, Support bracket – Dell PowerEdge C8000 User Manual

Page 186

Advertising
background image

186

Installing System Components

5 If applicable, replace the mezzanine card. See "Installing the Infiniband

Mezzanine Card" on page 179 or "Installing the 10 GbE Mezzanine Card"

on page 182.

6 If applicable, replace the RAID battery. See "Installing the RAID Battery"

on page 171.

7 Replace the front cover. See "Installing the Front Cover" on page 149.
8 Replace the sled. See "Installing a Sled" on page 144.

Removing the MicroSD Card Reader Support Bracket

1 Remove the sled from the enclosure. See "Removing a Sled" on page 143.
2 Remove the front cover. See "Removing the Front Cover" on page 148.
3 If applicable, remove the RAID battery. See "Removing the RAID Battery"

on page 169

4 If applicable, remove the mezzanine card. See "Removing the Infiniband

Mezzanine Card" on page 176 or "Removing the 10 GbE Mezzanine Card"

on page 180.

5 Remove the MicroSD card reader. See "Removing the MicroSD Card

Reader" on page 183.

6 Remove the two screws securing the MicroSD card reader support bracket.

See Figure 3-33.

7 Lift the support bracket out of the sled tray. See Figure 3-33.

Advertising