Dell PowerEdge C8000 - Manual (Page 113)

Using the System Setup Program 113
4026 Manufacturing
Mode
Enables the manufacturing mode to bypass POST
tasks/memory tests and F1/F2 prompts on specific
error messages. Used by manufacturers only and is not
for general use.
4027 Manufacturing
Mode
Disables the manufacturing mode to bypass POST
tasks/memory tests and F1/F2 prompts on specific
error messages. Used by manufacturers only and is not
for general use.
4033 Serial Port Mode Console Redirection baud rate is set to 115,200 bits
per second.
4034 Serial Port Mode Console Redirection baud rate is set to 57,600 bits per
second
4035 Serial Port Mode Console Redirection baud rate is set to 19,200 bits per
second.
4036 Serial Port Mode Console Redirection baud rate is set to 9,600 bits per
second.
403F Clear SMBIOS
System Event Log
Deletes all records in the BMC system event log on
the next boot.
4800 Node Manager Enables the Node Manager mode for Intel processors.
4801 APML Enable the Advanced Platform Management Link
mode for AMD processors.
4802 CPU Power
Capping
To decide the highest processor performance state in
the OS. (P0-state).
4803 CPU Power
Capping
To decide the highest processor performance state in
the OS. (P1-state).
4804 CPU Power
Capping
To decide the highest processor performance state in
the OS. (P2-state).
4805 CPU Power
Capping
To decide the highest processor performance state in
the OS. (P3-state).
4806 CPU Power
Capping
To decide the highest processor performance state in
the OS. (P4-state).
Table 2-1. D4 Token Table (continued)
Token Setup Option Description