Dell PowerEdge M600 - Manual (Page 118)

80 Using the CLI
www
.dell.com | support.dell.com
Select option (0-5):
CLI command output for the show system id command:
console>show system id
Service Tag: 89788978
Serial Number:
Asset Tag: none
Unit Service tag Serial number Asset tag
----- ------------ -------------- ------------
2 89788978 none
Monitoring Traps from CLI
It is possible to connect to the CLI session and monitor the events or faults that are being sent as
traps from the system. This feature is equivalent to the alarm-monitoring window in a typical
network management system. The user enables events or monitor traps from the CLI by entering
the command logging console. Traps generated by the system are dumped to all CLI sessions that
have requested monitoring mode to be enabled. The no logging console command disables trap
monitoring for the session. By default, console logging is enabled.