Show boot-version, Show cut-through mode – Dell PowerEdge M600 User Manual
Page 278
256
System Management Commands
www
.dell.com | support.dell.com
User Guidelines
This command has no user guidelines.
Example
The following example displays
console(config)#stack
console(config-stack)#set description 1 "unit 1"
show boot-version
Use the show boot-version command to display the boot image version details. The details
available to the user include the build date and time.
Syntax
show boot-version
Default Configuration
This command has no default configuration.
Command Mode
User EXEC or Privileged EXEC
User Guidelines
No specific guidelines.
Example
console#show boot-version
unit Boot Image Version
1
Thu Aug 30 12:01:04 2007
show cut-through mode
Use the show cut-through mode command to show the cut-through mode on the switch.
Syntax
show cut-through mode
Command Mode
Privileged EXEC