Exit (mst) – Dell PowerEdge M600 User Manual
Page 458
450
Spanning Tree Commands
www
.dell.com | support.dell.com
Syntax
clear spanning-tree detected-protocols [ethernet interface| port-channel port-channel-
number]
•
interface—A valid Ethernet port. The full syntax is : unit/port.
•
port-channel-number—A valid port channel.
Default Configuration
This command has no default setting.
Command Mode
Privileged EXEC mode
User Guidelines
This feature is used only when working in RSTP or MSTP mode.
Example
The following example restarts the protocol migration process (forces the renegotiation with
neighboring switches) on 1/g1.
console#clear spanning-tree detected-protocols ethernet 1/g1
exit (mst)
Use the exit command in MST mode to exit the MST configuration mode and apply all
configuration changes.
Syntax
exit
Default Configuration
MST configuration.
Command Mode
MST mode
User Guidelines
This command has no user guidelines.