Mark ip-precedence – Dell PowerEdge M600 User Manual
Page 374
362
QoS Commands
www
.dell.com | support.dell.com
Default Configuration
This command has no default configuration.
Command Mode
Policy-Class-Map Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to mark all packets with an IP DSCP value of "cs4."
console(config-policy-classmap)#mark ip-dscp cs4
mark ip-precedence
Use the mark ip-precedence command in Policy-Class-Map Configuration mode to mark all
packets for the associated traffic stream with the specified IP precedence value.
Syntax
mark ip-precedence prec-value
•
prec-value—Specifies the IP precedence value as an integer. (Range: 0 - 7)
Default Configuration
This command has no default configuration.
Command Mode
Policy-Class-Map Configuration mode
User Guidelines.
This command has no user guidelines.
Example
The following example displays
console(config(#policy-map p1 in
console(config-policy-map)#class c1
console(config-policy-classmap)#mark ip-precedence 2
console(config-policy-classmap)#