Show supported switchtype – Dell PowerEdge M600 User Manual
Page 288
266
System Management Commands
www
.dell.com | support.dell.com
Syntax
show stack-standby
Default Configuration
This command has no default configuration.
Command Mode
privileged EXEC or User EXEC
User Guidelines
No specific guidelines.
Example
console>show stack-standby
standby unit: 3
show supported switchtype
Use the show supported switchtype command in User EXEC mode to display information about
all supported switch types.
Syntax
show supported switchtype [switchindex]
•
switchindex—Specifies the index into the database of the supported switch types,
indicating the type of the switch being preconfigured. The switch index is a 32-bit
integer. (Range: 0 - 65535)
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.