Virtual router redundancy protocol commands, Ip vrrp, 58 virtual router redundancy protocol commands – Dell PowerEdge M600 User Manual
Page 799
Virtual Router Redundancy Protocol Commands
813
Virtual Router Redundancy Protocol
Commands
ip vrrp
Use the ip vrrp command in Global Configuration mode to enable the administrative mode of
VRRP for the router. In Interface Config mode, this command enables the VRRP protocol on an
interface. Use the no form of the command to disable the administrative mode of VRRP for the
router.
Syntax (Global Config Mode)
ip vrrp
no ip vrrp
Syntax (Interface Config Mode)
ip vrrp vr-id
no ip vrrp vr-id
•
vr-id—Virtual router identification. (Range: 1-255)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration or Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example in Global Configuration mode enables VRRP protocol on the router.
console(config)#ip vrrp