Show version – Dell PowerEdge M600 User Manual
Page 296
Advertising
274
System Management Commands
www
.dell.com | support.dell.com
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays a list of active users and the information about them.
console#show users
Username Protocol Location
-------- -------- ------------
Bob Serial
John SSH 172.16.0.1
Robert HTTP 172.16.0.8
Betty Telnet 172.16.1.7
show version
Use the show version command in User EXEC mode to displays the system version information.
Syntax
show version [unit ]
•
unit—The unit number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
Advertising