Add ethernet, No add ethernet – Dell PowerEdge M600 User Manual
Page 236
208
Link Dependency Commands
www
.dell.com | support.dell.com
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
No specific guidelines
Example
console(config)#no link-dependency group 1
Configuration cleared for link-dependency group 1
add ethernet
Use the add ethernet command to add member Ethernet port(s) to the dependency list.
Syntax
add ethernet intf-list
•
intf-list
—List of Ethernet interfaces. Separate nonconsecutive ports with a comma
and no spaces. Use a hyphen to designate the range of ports. (Range: Valid Ethernet
interface list or range)
Default Configuration
This command has no default configuration.
Command Mode
Link Dependency mode
User Guidelines
No specific guidelines
Example
console(config-depend-1)#add ethernet g1
no add ethernet
Use the no add ethernet command to remove member Ethernet ports from the dependency list.
Syntax
no add ethernet intf-list