Show ports security – Dell PowerEdge M600 User Manual
Page 155
Address Table Commands
121
•
vlan_id—A valid VLAN ID value.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
In this example, the Multicast configuration for VLAN 1 is displayed.
console#show bridge multicast filtering 1
Filtering: Disabled
VLAN: 1
Mode:
Forward-Unregistered
show ports security
Use the show ports security command in Privileged EXEC mode to display the port-lock status.
Syntax
show ports security [ethernet interface | port-channel port-channel-number]
•
interface—A valid Ethernet port.
•
port-channel-number—A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.