Dell PowerVault NX3000 - Manual (Page 135)

Installing System Components
135
Figure 3-31. Installing and Removing the Heat Sink
CAUTION:
The processor is held in its socket under strong pressure. Be aware
that the release lever can spring up suddenly if not firmly grasped.
9 Position your thumb firmly over the processor socket-release lever and
release the lever from the locked position. Rotate the lever 90 degrees
upward until the processor is released from the socket. See Figure 3-32.
10 Rotate the processor shield upward and out of the way. See Figure 3-32.
1 heat sink 2 release lever (2)
1
2