Dell PowerVault NX3000 User Manual

Page 35

Advertising
background image

About Your System

35

E2022

General

failure

during POST.

Check screen

message.

General failure after video. Check screen for specific

error messages.

E2023

BIOS unable

to mirror

memory. Check

DIMMs.

The system BIOS could not
enable memory mirroring
because of a faulty memory
module or an invalid
memory configuration.

See "Troubleshooting
System Memory."

E2110

Multibit

Error on DIMM

##. Reseat

DIMM.

The memory module in slot
"##" has had a multi-bit
error (MBE).

See "Troubleshooting
System Memory."

E2111

SBE log

disabled on

DIMM ##.

Reseat DIMM.

The system BIOS has
disabled memory single-bit
error (SBE) logging and will
not log any more SBEs until
the system is rebooted.
"##" represents the
memory module implicated
by the BIOS.

Remove AC power to the
system for 10 seconds and
restart the system.

If the problem persists,
see "Troubleshooting
System Memory."

E2113

Mem mirror

OFF on DIMM

## & ##.

Power cycle

AC.

The system BIOS has
disabled memory mirroring
because it has determined
one half of the mirror has
had too many errors. "##
& ##" represents the
memory module pair
implicated by the BIOS.

Remove AC power to the
system for 10 seconds and
restart the system.

If the problem persists,
see "Troubleshooting
System Memory."

I1910

Intrusion

detected.

Check chassis

cover.

System cover has been
removed.

Information only.

Table 1-1.

LCD Status Messages (continued)

Code

Text

Cause

Corrective Actions

Advertising