Dell PowerVault NX3000 User Manual
Page 88
Advertising
88
Installing System Components
Figure 3-8.
Removing or Installing the Internal SD Module
4 Connect the internal SD module cable to the connector on the control
panel board. See Figure 3-8.
5 Close the system. See "Closing the System."
6 Reconnect the system and peripherals to their power sources, and turn
them on.
1
latch
2
internal SD module
3
SD flash card
4
SD card slot (SD connector)
5
release tab
6
internal SD module cable
7
internal SD module connector
8
control panel board
5
2
4
8
3
6
1
7
Advertising