Dell PowerVault NX3000 User Manual

Page 40

Advertising
background image

40

About Your System

BIOS Update

Attempt Failed!

Remote BIOS update
attempt failed.

Retry the BIOS update. If
problem persists, see
"Getting Help."

Caution!

NVRAM_CLR jumper

is installed on

system board

NVRAM_CLR jumper is
installed in the clear setting.
CMOS has been cleared.

Move the NVRAM_CLR
jumper to the default
position (pins 3 and 5). See
Figure 6-1 for jumper
location. Restart the system
and re-enter the BIOS
settings. See "Using the
System Setup Program and
UEFI Boot Manager."

CPU set to

minimum

frequency.

The processor speed may be
intentionally set lower for
power conservation.

If not an intentional setting,
check any other system
messages for possible causes.

CPU

x installed

with no memory.

Memory modules are
required but not installed in
the indicated processor’s
memory slots.

Install memory modules for
the processor. See "System
Memory."

CPUs with

different cache

sizes detected.

Mismatched processors have
been installed in the system.

Ensure that all processors
have the same cache size,
number of cores and logical
processors, and power rating.
Ensure that the processors
are properly installed. See
"Processors."

CPUs with

different core

sizes detected!

System halted

CPUs with

different

logical

processors

detected! System

halted

CPUs with

different power

rating detected!

System halted

Table 1-2.

System Messages (continued)

Message

Causes

Corrective Actions

Advertising