Dell PowerVault NX3000 User Manual

Page 47

Advertising
background image

About Your System

47

SATA port

x

device auto-

sensing error

SATA port

x

device

configuration

error

SATA port

x

device error

The drive connected to the
specified SATA port is faulty.

Replace the faulty drive.

Sector not found

Seek error

Seek operation

failed

Faulty hard drive, USB
device, or USB medium.

Replace the USB medium or
device. Ensure that the USB
or SAS backplane cables are
properly connected. See
"Troubleshooting a USB
Device" or "T
roubleshooting
a Hard Drive" for the
appropriate drive(s) installed
in your system.

Shutdown failure

General system error.

See "Getting Help."

The amount of

system memory has

changed

Memory has been added or
removed or a memory
module may be faulty.

If memory has been added or
removed, this message is
informative and can be
ignored. If memory has not
been added or removed,
check the SEL to determine
if single-bit or multi-bit
errors were detected and
replace the faulty memory
module. See
"Troubleshooting System
Memory."

Table 1-2.

System Messages (continued)

Message

Causes

Corrective Actions

Advertising