SINGER XL-420 FUTURA - Manual (Page 28)

26
Stitch length and width/needle position controls
*Auto/Default settings
<RXU VHZLQJ PDFKLQH ZLOO SURGXFH PRVW RI \RXU VWLWFKLQJ
requirements at an Auto/Default Stitch Length and Width. When
a pattern is selected, it will automatically sew at default settings of
stitch length, width and needle position for straight stitch.
Auto (preprogrammed) default settings are easily determined
by moving the Stitch Length and Width / Needle Position
Control Knob. The LED Indicator next to the Control will light
LQRUDQJHZLWKRXWEOLQNLQJDQGDEHHSZLOOVRXQGLQGLFDWLQJ\RX
are at the Auto / Default Position.
*Manual settings
Once you have determined the Auto / Default position you can
manually change the length, width or straight stitch needle
postition according to your preference. Starting at the Auto
SRVLWLRQ VOLGH WKH FRQWURO NQRE OHIW RU ULJKW WR ORFDWH HDFK RI
the potential adjustments. At each manual adjustment point,
WKH/('ZLOOEOLQNWLPHVLQJUHHQDQGDEHHSZLOOVRXQG
The LED will light in red beyond the potential adjustment range.
NOTES: 1. Some patterns offer more opportunities for
manual adjustments than others.
2. A n a l t e r n a t e m e t h o d o f d e t e r m i n i n g
a v a i l a b l e a d j u s t m e n t s i s t o m o v e t h e
control knobs while sewing slowly.
Twin needle mode button
The width setting for twin needle sewing can be activated if it is
available for the selected pattern. The LED turns on when twin
needle sewing is activated.
Width setting for twin needle sewing can be activated, if it
is available for a selected pattern. LED turns on when twin
needle sewing is activated.