Welch Allyn LC101 CO2 Module - User Manual - Manual (Page 28)

LC101 CO
2
Module OEM Implementation Manual
Page 28 Confidential Welch Allyn OEM Technologies
Simple Commands
Simple commands instruct the Module to send Module data or EEPROM data and to reset the
Module software or reset sensor error.
Host Command Description
<C00> Request and confirm operating mode and Module status
<C20> Request software version
<C21> Request hardware version
<C22> Request ambient barometric pressure
<C23> Request sensor temperature
<C26> Request single CO
2
measurement
<C27> Request single breath data packet
<C2E> Request current set flow rate
<C31> Request sensor EEPROM revision #
<C32> Request sensor manufacturer code
<C33> Request sensor serial #
<C3A> Request last calibration date