Cub Cadet 8454 - Manual (Page 171)

TRANSMISSION SYSTEM
4-67 D569-W02 May-2003
• Checking Bearing
1. Hold the inner race, and push and pull the outer
r a c e i n a l l d i r e c t i o n s t o c h e c k f o r w e a r a n d
roughness.
2. Apply transmission fluid to the bearing, and hold
the inner race. Then, turn the outer race to check
rotation.
3. If there is any defect, replace it.
[A] FIT Groove
(1) Differential Pinion Shaft
(2) Differential Pinion
(3) Differential Pinion
(4) Differential Pinion Washer
(5) Differential Pinion Shaft 2
(6) Differential Side Gear
(7) Differential Side Gear Washer
(8) Differential Cover
(9) Differential Case
(10) Differential Lock Shifter
(11) Spiral bevel Gear
• Differential Side Gear
1. Take out the differential side gear (2) and differen-
tial side washer (1).
(When reassembling)
• Check the thrust and bearing surface of both differ-
ential side gears (2). If they are worn or damaged,
bores in the differential case may also be damaged.
Be sure to replace their parts.
(1) Differential Side Gear Washer
(2) Differential side Gear
569W4A9A
569W4B0A
569W4B1A