6 front bracket – Cub Cadet 8454 User Manual

Page 193

Advertising
background image

FRONT AXLE

5-19

D569-W02 May-2003

569W525A

5.6 FRONT BRACKET

A. TO DISASSEMBLING

1. Remove mounting nut (7), bolt (6) and seal washer

(8).

2. Separate front bracket (2) from front axle support (1).

3. Remove two oil seals (5), DX bush (4) and adjust-

ing plate (3) in front bracket (2).

4. Remove grease nipple (9).

B. TO ASSEMBLE

1. Insert adjusting plate (3) into the inner bore of front

bracket (2).

2. Install DX bushing (4) with a replacing tool

3. Install two oil seals (5) with a replacing tool and

apply grease.

4. Install grease nipple (9), seal washer (8), mount-

ing nut (7) and bolt (6).

5. Install front bracket ass’y (2) on front axle support (1).

6. Apply grease to the inner bore of front bracket (2)

via grease nipple (9).

Knock the groove of DX bushing (4)
into the nipple’s groove of front bracket
(2) aligned.

Install the lip area of oil seal (5)
outward.

(1) Front Axle Support

(6) Bolt

(2) Front Bracket

(7) Nut

(3) Adjusting Plate

(8) Seal Washer

(4) DX Bushing

(9) Grease Nipple

(5) Oil Seal

Tightening
torque

Tightening nut

(7) of the front

bracket

Tightening bolt

(6) of the front

bracket

98.1 ~ 147.1 N·m

10.0 ~ 15.0 kgf·m

72.3 ~ 108.4 lbf·ft

19.6 ~ 29.4 N·m

2.0 ~ 3.0 kgf·m

14.4 ~ 21.6 lbf·ft

CAUTION

Advertising