Cub Cadet 8454 - Manual (Page 320)

CHAPTER 9 8454
9-6 D569-W02 May-2003
10. Remove head pin and snap pin from Hi-Low shift
lever connector and remove Hi-Low shift lever.
11. Remove head pin and snap pin and then remove
hydraulic control rod. Remove and disconnect
head pin and snap pin connected between double
acting lever and rod (double acting).
12. Remove head pin and snap pin connected to lever
1, 2 (switch) of rod (switch) and then remove rod
(switch).
(1) Lever 2, Hi-Low (3) Lever, Hi-low
(2) Rod, Hi-Low (4) Shaft, Lever
(1) Lever 1, Double Acting (5) Lever 1
(2) Rod (6) Lever 2
(3) Bracket (7) Joint Pin
(4) Shaft (8) Snap Pin
(1) Plate (Switch) (4) Rod (Switch)
(2) Bracket (Switch) (5) Lever 1 (Switch)
(3) Lever 2 (6) Lever
569W910A
569W911A
569W912A