Cub Cadet 8454 - Manual (Page 98)

CHAPTER 3 8454
3-8 D569-W02 May-2003
PANEL FRAME AND STEERING ASSEMBLY
1. Remove the panel frame mounting crews (Two
screws a upper part. Seven screws at lower part).
2. Take out the panel frame and steering assembly as
a unit.
(When reassembling)
• Do not get in the wiring harness between panel
frame and platform.
569W308A
HYDRAULIC HOSES
1. Disconnect the main delivery hose (1), return hose
(2), right turning delivery hose (3) and left turning
delivery hose (4).
(When reassembling)
• In assembling the turning delivery hoses to the
steering controller, connect the delivery hose with
identification mark (type) “A” to the L port of the steer-
ing controller.
Tightening
torque Main delivery
hose retaining
nut
Turning delivery
hose retaining
nut
46.6 ~ 50.9 N·m
4.8 ~ 5.2 kgf·m
34.4 ~ 37.6 lbf·ft
24.5 ~ 29.4 N·m
2.5 ~ 3.0 kgf·m
18.1 ~ 21.7 lbf·ft
(1) Steering Hose P (3) Steering Hose R
(2) Steering Hose T (4) Steering Hose L
569W307A